METSEPM5320 Schneider power meter PowerLogic PM5320, ethernet, up to 31st Harmonic, 256KB 2DI/2DO 35 alarms
Product Description:
This device is a flush-mount energy meter with a 96mm by 96mm backlit LCD display. The meter provides Class 0.5S accuracy per IEC 62053-22 standard and 64 samples per cycle. The meter will measure Energy, Active and Reactive Power, Voltage, Current, Frequency, Power Factor and up to the 31st Harmonic. Include 256 kiloBytes of memory for two fixed parameters, active and reactive energy. The meter will function in a 50Hz or 60Hz network and accepts supply voltage ranging from 100 to 415 VAC and 125 to 250 VDC. Line rated current for this meter is 1A or 5A input and will support Single Phase and Neutral, Three Phase, or Three Phase and Neutral configurations. The range of measurement voltage between Phases is 35 to 690 VAC at 47 to 63 Hz. Measurement range between Phase and Neutral is 20 to 400VAC at 47 to 63 Hz. Communication protocol are Modbus TCP/IP and BACnet/IP based on 10/100 Mbit/s, Ethernet with RJ45 port support. The meter also has two digital inputs or digital outputs, configurable. There are 35 configurable alarms and it supports four tariff schedules. Product dimensions are as follows: width 3.78 inches (96 millimetres), depth 2.83 inches (72 millimetres), height 3.78 inches (96 millimetres) and product weight 15.2 onces (430 g).
- Feature-rich power and energy meters
- Digital input and output for WAGES monitoring and control
- Modbus 485 communication port for remote monitoring
- Identify energy savings opportunties with precision accuracy of Class 0.5S
- 31st Hamronic measurement for Power Quality management
- Environmental performance of the product
Features:
Main
| Range | PowerLogic |
| Product name | PowerLogic PM5000 |
| Device short name | PM5320 |
| Product or component type | Power meter |
Complementary
| Power quality analysis | up to the 31st harmonic |
| Device application | Multi-tariff
Power monitoring |
| Type of measurement | Current
Voltage
Frequency
Power factor
Energy
Active and reactive power |
| supply voltage | 90...450 V AC 45...65 Hz
100...300 V DC |
| network frequency | 50 Hz
60 Hz |
| [In] rated current | 1 A
5 A |
| type of network | 1P + N
3P + N
3P |
| Maximum power consumption in VA | 11 VA at 415 V |
| Ride-through time | 80 ms 120 V AC typical
100 ms 230 V AC typical
100 ms 415 V AC typical
50 ms 125 V DC typical |
| Display type | Monochrome graphic LCD |
| display resolution | 128 x 128 pixels |
| Sampling rate | 64 samples/cycle |
| Measurement current | 5…8500 mA |
| Analogue input type | Voltage (impedance 5 MOhm)
Current (impedance <= 0.3 mOhm) |
| Measurement voltage | 35…760 V AC 45...65 Hz between phases
20…440 V AC 45...65 Hz between phase and neutral |
| Frequency measurement range | 45…65 Hz |
| Number of inputs | 2 digital |
| Measurement accuracy | Active energy +/- 0.5 %
Reactive energy +/- 2 %
Active power +/- 0.5 %
Apparent power +/- 0.5 %
Frequency +/- 0.05 %
Power factor +/- 0.5
Current +/- 0.5 %
Voltage +/- 0.5 %
Apparent energy +/- 0.5 %
Reactive power +/- 2 % |
| Accuracy class | Class 0.5S active energy conforming to IEC 62053-22 |
| Number of outputs | 2 digital |
| Information displayed | Tariff (4) |
| Communication port protocol | Modbus TCP/IP at 10/100 Mbit/s, insulation 2500 V
BACnet IP |
| Communication port support | ETHERNET |
| Data recording | Maintenance logs
Alarm logs
Min/max of instantaneous values
Event logs
Time stamping
Data logs |
| Memory capacity | 256 kB |
| Connections - terminals | Voltage circuit: screw terminal block4
Control circuit: screw terminal block2
Current transformer: screw terminal block6
Input/output circuit: screw terminal block6
Relay output: screw terminal block4
Ethernet network: RJ45 connector |
| mounting mode | Flush-mounted |
| Mounting support | Framework |
| Standards | IEC 62053-22:2020
EN 50470-1
IEC 60529
IEC 61557-12:2015
UL 61010-1
EN 50470-3
IEC 62053-24
IEC 62053-23:2020
IEC 62052-11:2020
IEC 62052-31:2015 |
| Product certifications | CE conforming to IEC 61010-1
CULus conforming to UL 61010-1 |
| Width | 96 mm |
| Depth | 72 mm |
| Height | 96 mm |
| Net weight | 430 g |
FAQ:
1. who are we?
We are based in Fijian, China, start from 2017,sell to Mid East(50.00%),Western Europe(25.00%),Southeast Asia(20.00%),Domestic Market(5.00%). There are total about 5-10 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
PLC,SENSOR,HMI,TRANSMITTERS
4. why should you buy from us not from other suppliers?
Zhicheng insists on striving for excellence business philosophy. whether its industrial automation spare parts or delivery efficiency,We are committed to doing better.
